ASM1E/2 - AS-i safety monitor

  • Technical features

    • Basic data
      • SeriesASM1
    • Characteristic parameters
      • SIL3, IEC 61508
      • SILCL3, IEC/EN 62061
      • Performance level (PL)e, EN ISO 13849-1
      • PFHd0.0000000091 per hour
      • Service life20 years, EN ISO 13849-1
      • Category4, EN ISO 13849
      • STOP category0 and 1, IEC/EN 60204-1
      • B10d at DC13 (inductive load)10.000.000 number of cycles, (I < 2 A, 24 V)
      • B10d at AC15 (inductive load)100.000 number of cycles, (2 A, 230 V), 250,000 (1 A, 230 V), 540,000 (0.5 A, 230 V)
    • Timing
      • System reaction time40 ms
      • Readiness delay10 ms
    • Electrical equipment
      • Number of Safety Monitors per AS-Interface network4 Piece(s)
      • Number of safety monitors, additional textWith maximum 31 integrated AS-Interface slaves
      • Protective circuitShort circuit protected, Polarity reversal protection
      • Performance data
        • Supply voltage24 V, DC, -15 ... 15 %
        • Supply voltage18.5 ... 31.6 V
        • Current consumption, max.200 mA
        • Current consumption from AS-i circuit45 mA
        • Overvoltage categoryIII, For rated operating voltage of 300 V AC in accordance with VDE 0110 part 1
        • FuseExternal with max. 4 A semi time-lag
      • Inputs
        • Number of digital switching inputs2 Piece(s)
        • Switching inputs
          • TypeDigital switching input
      • Outputs
        • Number of safety-related switching outputs (OSSDs)2 Piece(s)
        • Number of digital switching outputs1 Piece(s)
        • Switching outputs
          • TypeDigital switching output
          • Switching voltage, typ.22 V
          • Voltage typeDC
    • Interface
      • TypeAS-Interface Safety at Work, RS 232
      • AS-i
        • FunctionProcess
        • AS-i profileMonitor 7.F
        • Slave address1..31 programmable, default=0
        • Cycle time in accordance with AS-i specificationsMax. 5 ms
    • Connection
      • Number of connections2 Piece(s)
      • Connection 1
        • TypeTerminal
        • FunctionAS-i interface, Voltage supply, Signal IN, Signal OUT
        • Type of terminalScrew terminal
        • No. of pins19 Piece(s)
      • Connection 2
        • TypeRJ45
        • Designation on deviceCONFIG
        • FunctionConfiguration interface
      • Cable properties
        • Connection cross-sections1 x 0.2 to 2.5 mm², wire, 1 x 0.25 to 2.5 mm², wire with wire-end sleeve, 2 x 0.5 to 1.5 mm², wire with twin wire-end sleeve, 1 x 0.2 to 2.5 mm², wire, 1 x 0.25 to 1 mm², wire with wire-end sleeve, 2 x 0.2 to 1.5 mm², wire, 2 x 0.2 to 1.0 mm², wire
    • Mechanical data
      • Dimension45 mm x 105 mm x 120 mm
      • Housing materialPlastic, PA 66
      • Net weight450 g
      • Housing colorBlack
      • Type of fasteningSnap-on mounting
    • Operation and display
      • Type of displayLED
      • Type of configurationSoftware, Teach-in
      • Operational controlsPC software, Control buttons
    • Environmental data
      • Ambient temperature, operation-20 ... 60 °C
      • Ambient temperature, storage-30 ... 70 °C
    • Certifications
      • Protection classIP 20, Only suitable for use in electrical operating rooms/cabinets with IP 54 minimum protection class.
      • Safety classIII
      • CertificationsAS-i, CE, c TÜV Rheinland US, TÜV Rheinland, UL, CSA
    • Functions
      • FunctionsService button for manual error unlocking and automatic device swap-out of the safe AS-i slaves, Status LED display for AS-Interface communication, OSSD, start/restart interlock, protective mode, errors, System signal output, Programmable logic operators, system statuses, STOP 0 / STOP 1, Start/restart interlock (RES), selectable, Dynamic contactor monitoring (EDM), selectable, Monitoring modules with contact-simultaneity monitoring, Activation/deactivation of function modules, Support of AS-Interface A/B technology, Diagnostics data transfer via AS-Interface, Error unlocking via AS-Interface, Monitoring modules with contact bounce filter, Programmable logic operators, FLIP-FLOP, Programmable logic operators, switch on/off delay
      • Number of configurable function modules48 Piece(s)
      • Number of programmable logic operators, OR (inputs)6 Piece(s)
      • Number of programmable logic operators, AND (inputs)6 Piece(s)

  • Accessories

  • Downloads

Part data of: 2013-05-05 21:03:00

© Leuze electronic GmbH + Co. KG · In der Braike 1 · 73277 Owen / Germany · Phone: +49 7021 573-0 · Fax +49 7021 573-199 · info@leuze.de